Heavy-duty storage racking for boats and jet skis (Sentosa) | Project Photos

Five-tier steel rack of blue uprights and orange beams holding jet skis, inside a covered storage shed

Tall boat and jet ski rack in a shed bay, jet skis on timber bunks at each level and a wet concrete floor

Rows of two-tier boat racking under a covered shed, boats on the upper beams and covered craft below

Wide view of the boat storage racks between the shed columns, small boats stored two tiers high

Covered speedboat resting on timber bunks on the upper tier of the steel rack

Looking up at the blue upright frames, orange beams and galvanised brackets that carry a boat hull

Close view of a galvanised bunk bracket bolted to an orange beam with a timber bunk on top

Galvanised plate bracket bolted through the timber bunk and the orange beam, seen from below

Beam with a safe working load label, galvanised brackets and timber bunks under a stored boat

Panoramic view of the boat racks filling the open-sided shed, boats stored two tiers high

Three-tier boat racks with an access ladder, boats on the upper tiers and a car parked at floor level

Boats on orange beams at the upper tiers of the rack, looking up between the blue uprights

Speedboat stored on the second tier of the rack with a covered boat above it

Line of racking bays with boats on every tier, an access ladder and floor markings below

Five-tier jet ski rack fully loaded, with orange base beams and blue uprights

Boats stored on three tiers of racking beside a shed column, yellow floor markings on the wet floor

Jet ski at floor level in front of the rack with outboard boats stored on the tier above